REPLACING OLD WIND SENSORS
ANALOG WIND SENSOR – A2C59501983
This is the latest redesign of the Analog Wind Sensor.
It is equipped with a black 7-pin DIN connector 693 series with the following pinout:
Pin No. |
Description |
1 |
Sensor Power |
2 |
Sensor Power |
3 |
COS (Wind Direction) |
4 |
GND |
5 |
SIN (Wind Direction) |
6 |
Wind Speed Pulses |
7 |
N.C. |
“LOGIC” WIND SENSOR AFTER 8/89 – N01-340-404
This sensor can be replaced one-to-one with the new sensor A2C59501983.
The Logic Wind instrument was using the same 7-poles DIN connector as used today (with adapter cable N05-800-236).
“OCEANLINE” WIND SENSOR – N01-340-602
This sensor can be distinguished because of its blue-colored connector.
The OceanLine Wind instrument was using the 8-poles AMP Modular connector (adapter cable N05-801-542).
Pin No. |
Description |
1 |
SIN (Wind Direction) |
2 |
Wind Speed Pulses |
3 |
GND |
4 |
COS (Wind Direction) |
5 |
Sensor Power |
6 |
Sensor Power |
VDO WIND SENSOR BEFORE 8/89– 263-200-003-001
This sensor cannot be replaced with the new sensor